Which Coils Fit My GeekVape Aegis? Pod Compatibility Guide (UAE)

Reviewed by Ismail Hossain, Product Specialist — Last reviewed: September 28, 2026

GeekVape’s Aegis line splits into two coil ecosystems depending on the device: pod-style Aegis devices use their own dedicated pod or one of several proprietary coil series, while tank-style Aegis mods (paired with a Zeus-style tank) use separate mesh coil families. Reviewed in full in our GeekVape Aegis Series Review, this guide maps every current Aegis-compatible coil to its device in our Pod & Coil category. Jump to: Quick lookup table · The Boost family (B, G & P coils) · Tank-style Aegis mods (Z & M coils) · How to identify your device · FAQ.

For full specifications and firmware updates, see GeekVape’s official site.

Quick lookup table

The Boost family (B, G & P coils)

GeekVape’s Boost line has gone through several coil generations that all look similar but are not interchangeable. The original Aegis Boost uses B-series coils (B0.2 through B1.2, currently sold as a coil-only replacement); the Boost 2 and Boost Pro 2 moved to a dual-airflow G-series coil; and the standalone Boost Pro uses its own P-series coil. Confirm exactly which Boost generation you own before ordering, since the coil bases are not shared across generations.

Within each Boost-family coil series, several resistance options are typically offered, tuned for anything from a tighter mouth-to-lung draw up to a looser, higher-wattage direct-lung pull. Because the three coil bases (B, G, P) aren’t interchangeable with each other despite looking broadly similar side by side, buying the wrong series is one of the more common mistakes on this line — always confirm the letter code on your current coil, or your pod’s stated coil series, rather than assuming from the device’s general Boost branding alone.

Tank-style Aegis mods (Z & M coils)

Higher-power Aegis mods such as the Aegis Legend series are typically paired with GeekVape’s Zeus sub-ohm tank rather than a snap-in pod, and use mesh coils from the Z-series or the tank’s own branded Zeus coil, depending on which tank generation shipped with your kit. Newer Legend and mesh-tank mods have moved to the M-series coil line, which covers a wider range of single, dual, triple and quadra-coil builds for higher-wattage vaping.

The move from Z-series to M-series reflects GeekVape pushing its higher-power mods toward more configurable coil builds — a dual or triple-coil M-series option can handle higher wattages and produce more vapor than a typical single-coil Z-series setup, at the cost of burning through e-liquid faster. If your Legend-series mod shipped more recently, checking whether your tank explicitly states “M-series compatible” is more reliable than assuming based on the Legend name alone, since the same model name has spanned both coil generations over time.

How to identify your device

Check the model name printed on your device or its original packaging and match it directly against the lookup table above. If your Aegis device came with a snap-in pod, look at the pod’s compatible coil series (B, G or P) rather than assuming any Boost-family coil fits; if it came with a screw-in tank, check whether that tank is Zeus-branded (Z-series) or a newer mesh-tank generation (M-series) before ordering.

If you’re still unsure after checking the model name, the coil base itself is usually printed with its own series letter and resistance (for example “B1.0” or “M0.2”) — matching that exact code against a new coil’s packaging is more reliable than matching the device name alone, particularly on tank-style mods where the tank and the mod can sometimes be sold or replaced separately.

Coil lifespan & when to replace

Whichever Aegis coil series you own, the signs it needs replacing are largely the same: a burnt or harsh taste, noticeably weaker vapor production, or a gurgling sound when drawing. Most pod-style coils last one to three weeks with regular use, while higher-wattage tank-style mesh coils can wear out somewhat faster under heavy daily use, since more power generally means more stress on the coil.

Before assuming a coil has failed unusually early, check that the pod or tank is fully and firmly seated, and that a fresh coil was given a few minutes to saturate with e-liquid before the first draw — a loose connection or an unprimed coil can produce symptoms that look identical to a genuinely worn-out part. If e-liquid is leaking rather than the flavor simply turning burnt, an overfilled pod or tank, a cracked seal, or an unprimed coil are the usual causes, in roughly that order of likelihood.

Verdict

GeekVape’s Aegis range covers more coil families than most single-brand pod-system lines, so matching your exact Boost generation or tank type against the lookup table above matters more here than with most brands. Browse the full range in our Pod & Coil category, and see our GeekVape Aegis Series Review if you’re choosing a new device rather than replacing a pod or coil.

GeekVape Aegis Coil & Pod FAQ

Do all Aegis Boost devices use the same coil?
No — the original Boost uses B-series coils, Boost 2 and Boost Pro 2 use G-series, and the standalone Boost Pro uses P-series. Check your exact model before ordering.

How often should I replace my Aegis pod or coil?
Typically every 1-3 weeks with daily use, or sooner if the flavor turns burnt or vapor production drops.

What’s the difference between Z-series and M-series coils?
Z-series coils are GeekVape’s earlier mesh coil line for Zeus-branded sub-ohm tanks, while M-series is the newer, wider coil range spanning single to quadra-coil builds for higher-wattage setups.

Can I replace just the coil instead of the whole pod?
On Boost-family devices, yes — the coil is a separate replaceable part inside the pod. Aegis Hero 2 and Aegis One use sealed pods with the coil built in, so you replace the whole pod.

Are GeekVape coils and pods legal to buy in the UAE?
Yes, vape hardware and accessories are sold in the UAE subject to the same UAE.S 5030:2018 and 18+ age rules as other vaping products. See our Is Vaping Legal guide.

Why does my new Aegis coil taste burnt right away?
It likely wasn’t primed. Fill the pod or tank and let it sit for three to five minutes before your first draw so the coil fully saturates with e-liquid.

Can I use a B-series coil in a Boost 2?
No — the Boost 2 and Boost Pro 2 use the G-series coil, not B-series. Check your exact Boost generation against the lookup table before ordering.

Do Zeus tanks and M-series mods use the same coil?
No — they’re separate coil families. Check whether your tank is explicitly Zeus-branded (Z-series) or a newer mesh-tank generation (M-series) before ordering.

My Aegis device doesn’t match anything in the table — what do I do?
Older or discontinued Aegis generations may use a coil family no longer listed in our current catalogue. Reach out through our Contact page with your device’s model name and we’ll help confirm what’s available.

Related: shop the full GeekVape brand range.

Last updated: 28 September 2026. Prices and stock reflect vaporae.com’s catalogue at time of writing and may change — check individual product pages for current price and availability. Sale restricted to adults 18+ in the UAE.

Reviewed by Ismail Hossain, Founder & Product Specialist — Last reviewed: 28 September 2026.

Products on this site contain nicotine, an addictive substance. Sale restricted to adults 18+.

Authenticity Guarantee: https://vaporae.com/authenticity-guarantee/ | Responsible Vaping Health Disclaimer: https://vaporae.com/responsible-vaping-health-disclaimer/